The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
-
-
Xlantic replied to the thread Should I replace the dynaplate?.Maybe soaking in paint stripper followed by high-pressure air blasts from behind ... -
Xlantic replied to the thread Alternator questions (F-L 120 GrandBanks 32).A common practice with these engines is to leave a spare belt in place, with the coolant hose already though it, so it can be installed...
-
-
Xlantic replied to the thread Heat pump combo washer/dryer.I have now had a Siemens iQ500 (sorry, European model) for five months at home and it works very well. It takes between one and two...
-
Xlantic replied to the thread Dryer vent install ideas.You might consider a ventless dryer. I have a heat-pump one at home (Siemens iQ500) which works great.
-
Xlantic replied to the thread Sea ladder.I installed one of these ladders under the swim platform a couple of year ago and am very happy with it...
-
Xlantic replied to the thread What are these hoses for?.The compartments of my fridge and freezer have drain-holes and hose down to the bilges.
-
Xlantic replied to the thread GB 36 propane locker update advice.In place of a solenoid switch I installed a mechanical timer similar to the one shown below. With this there is no risk of forgetting...
-
-
Xlantic replied to the thread Belliure 48 wanted 2006 onwards.There is this ad but not sure it is real ... https://dailyboats.com/boat/10835-buy-belliure-48-for-sale
-
Xlantic replied to the thread Has anyone rebuilt there twin ford lemans in a Grand Banks 36 in the boat?.FWIW, a mechanic replaced the no. 6 pistons in my twin FL 120s on a GB 42 while on the water.
-
-
Loading…
-
Loading…
-
Loading…
