The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
the Fly Bridge Deck getting re-cored

the Fly Bridge Deck getting re-cored

  • 0
  • 0
Fiberglass over the newly re-cored ttransom

Fiberglass over the newly re-cored ttransom

  • 0
  • 0
Transom prepped and ready for new core

Transom prepped and ready for new core

  • 0
  • 0
Just after Launch in June 2018

Just after Launch in June 2018

  • 0
  • 0
Out of the shed for the first time in 7 months

Out of the shed for the first time in 7 months

  • 0
  • 0
removing tape and plastic after spraying the cove stripe and scroll.

removing tape and plastic after spraying the cove stripe and scroll.

  • 0
  • 0
incredible finish by Osprey

incredible finish by Osprey

  • 0
  • 0
About ready for the cove strip, scroll and bottom paint.

About ready for the cove strip, scroll and bottom paint.

  • 0
  • 0
Spraying the boot stripe.

Spraying the boot stripe.

  • 0
  • 0
The entire hull has been faired and is now ready to be sprayed

The entire hull has been faired and is now ready to be sprayed

  • 0
  • 0
final fairing before spraying the boot stripe

final fairing before spraying the boot stripe

  • 0
  • 0
A section of the fly bridge deck. The core has completely rotted.

A section of the fly bridge deck. The core has completely rotted.

  • 0
  • 0
transom re-glassed and faired.

transom re-glassed and faired.

  • 0
  • 0
Starboard side re-glassed and ready for fairing.

Starboard side re-glassed and ready for fairing.

  • 0
  • 0
second round of sections after vacuum bagging. The new core is Correx, the dark sections are Coosa board where the through hulls will go.

second round of sections after vacuum bagging. The new core is Correx, the dark sections are Coosa board where the through hulls will go.

  • 0
  • 0
the first sections re-glassed and faired.

the first sections re-glassed and faired.

  • 0
  • 0
Brent working on the tuna door

Brent working on the tuna door

  • 0
  • 0
The Port Side Deck partially de-cored

The Port Side Deck partially de-cored

  • 0
  • 0
Half of the transom de-cored

Half of the transom de-cored

  • 0
  • 0
Arrival at Osprey Marine Composites

Arrival at Osprey Marine Composites

  • 0
  • 0
Drawing resin through the vacuum bag

Drawing resin through the vacuum bag

  • 0
  • 2
One vacuum bagged section of the starboard hull completely resonated

One vacuum bagged section of the starboard hull completely resonated

  • 0
  • 0
Three sections of the starboard side de-cored. Work is done in alternating sections in order to maintain Hull integrity and shape.

Three sections of the starboard side de-cored. Work is done in alternating sections in order to maintain Hull integrity and shape.

  • 0
  • 0
A

How to Dry Out a Hull

When we bought the boat from Shannon, it was listed as a Hull Up Refit with a "New Boat Warranty". Relying on the reputation of Shannon, we didn't have survey done (Huge Mistake!) until Shannon dumped the unfinished boat at Brewers in Portsmouth and we had to figure out how to get her finished. Tha
Click to expand...
There are no comments to display.

Album information

Album owner
Avalon36
Date created
Item count
23
View count
25
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

A

Avalon36

Media items
24
Albums
2
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top Bottom