The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
The mast is also completely rotten where the spreader was. That challenging-looking toilet seat is actually the bracket for the Raymarine Radar.
2016 06 11 MastTubes 001 Inside mould for homemade fiberglass tubes. Cut a slice out of a bit of 2" PVC plumbing pipe. Added a strip of wood to acco
2016 06 09 MastPlan The chosen design. The table mounted to the flybridge seat is actually the tabernacle for the mast. Details to follow (when I f
2016 06 09 MastElev The chosen design. Original bronze maststep. Homemade fiberglass adapter for step-aluminum mast and aluminum mast to fiberglass
The mast is also completely rotten where the spreader was. That challenging-looking toilet seat is actually the bracket for the Raymarine Radar.
The original spreader was completely rotten on top where you could not really see it.
On the left are the two bronze castings from the original mast. On the right are the two aluminum castings from the spinnaker pole. In any case, it wi
The original mast has been dissassembled. One idea for a replacement mast is this tube on the left which was some sort of spinnaker pole. Sadly, the O
DHeckrotte

The mast is also completely rotten where the spreader was. That challenging-looking toilet seat is actually the bracket for the Raymarine Radar.

There are no comments to display.

Media information

Album
Making a new Mast
Added by
DHeckrotte
Date added
View count
8
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top Bottom