The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

See posts with no answers

Cutting out the new panel. I used Sailrite's 24oz boat topping.

My trusty LSZ-1 set up on two 6' folding tables. This gave me a large enough surface to work easily. I have also set it up on the table in the sailb

I backed the panel with cut pieces and used double edge tape at the center hold them. I stapled the outside since I cut it large so I can mark the fi

Checking the new panel with the old.

Cutting out the new panel. I used Sailrite's 24oz boat topping.

I laid the vinyl (removed from old panel) on the new panel to make sure I got it right. (Well, I got it close)

20151008 175930[1]

20151009 153604[1]

Cutting out the new panel. I used Sailrite's 24oz boat topping.

Lollygag
Oct 9, 2015

There are no comments to display.