The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

See posts with no answers

Aft. New prop to replace old 16x12, which was overpitched resulting in low RPM. Sherpa and her MD2030 Volvo are best suited for a 16x8 prop (allows

Portside shot of Sherpa resting in her temporary berth after her refit at Progressive Marine Service, St. Petersburg, FL.

Bow shot of Sherpa resting in her temporary berth after her refit at Progressive Marine Service, St. Petersburg, FL.

Port side of vessel. Wheelhouse was repainted with Awlgrip. Note new stainless steel rubrails.

Aft. New prop to replace old 16x12, which was overpitched resulting in low RPM. Sherpa and her MD2030 Volvo are best suited for a 16x8 prop (allows

Starboard side. Note new stainless steel rub rails.

Inside adjacent to cabin door. Inside was re-painted with Pettit Shipendec.

Aft. New prop to replace old 16x12, which was overpitched resulting in low RPM. Sherpa and her MD2030 Volvo are best suited for a 16x8 prop (allows

Vashon_Trawler
Oct 11, 2014

Name on stern. You’re ahead of me.