The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

See posts with no answers

This is a picture of the plug being squared. I'm not a cabinetmaker so first cuts are close but not spot on. A tablesaw makes this easy for the plug

With the plug back in the hole, I lined up the teak and holly. Since I squared the plug it didn't line up with the sides of the hole so lined up it l

Here are a bunch of edge banding pieces I'll use to make the final measurements.

Triming some white oak to band the edges of the hatch. I used oak because it's a hardwood and will not tear up to much with continued use of the hatc

This is a picture of the plug being squared. I'm not a cabinetmaker so first cuts are close but not spot on. A tablesaw makes this easy for the plug

Just an end view showing the new thickness.

This is the hatch plug, stripped of the delaminated plywood and glued to a piece of 3/4 ply.

This is the hatch plug. As you can see, it's really delaminated. I'm going to strip off the plywood and leave just the top 1/16 layer to hold the te

This is a picture of the plug being squared. I'm not a cabinetmaker so first cuts are close but not spot on. A tablesaw makes this easy for the plug

Lollygag
Sep 5, 2014

There are no comments to display.