The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

See posts with no answers

This shows the guide block on the other side. By now I'm sweating. Gone too far to stop but really wondering what's wrong with my thinking.

This is the new hatch reluctantly coming up. It took another couple of minutes with the vibrator (oh baby) and a couple of whacks with the deadblow h

This is the vibrating tool. I'm sure it has a real name but it's a vibrating tool. I used it to finish the corners where the circular saw couldn't g

Then it's across the passageway. I set the blade about 1/6 above the beam. (used the smaller hatch as a guide) I knew I might have to finish it with

This shows the guide block on the other side. By now I'm sweating. Gone too far to stop but really wondering what's wrong with my thinking.

This is the guide block on the right side. I put them down with 1" pin nails through 3/4 wood. This let them stick in the cabin sole just enough to

This shows the guide block on the other side. By now I'm sweating. Gone too far to stop but really wondering what's wrong with my thinking.

Lollygag
Sep 3, 2014

There are no comments to display.