Search results

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
  1. Halinbrier

    What are these hoses for?

    Ah! Scott beat me to the likely answer. These may be drain hoses from the engine room vent boxes. I have similar hoses on my 1992 36' Grand Banks and have traced them back to the vent boxes. If you pop the vent grills off on the outside you may find the drains. Hal
  2. Halinbrier

    VHF antennas banging on bimini frame

    Antenna Shims I installed these antenna shims which moved the antenna away from my Bimini. https://www.fisheriessupply.com/shakespeare-anteanna-mount-shims/414
  3. Halinbrier

    GB broken plastic emergency tiller port

    Tiller Deck Plate Dusky carries Rabud deck plates.
  4. Halinbrier

    GB broken plastic emergency tiller port

    Tiller Deck Plate Try Dusky Online at Dusky Sport Center Online - Closeout Evinrude Dealer, & Suzuki Dealer Outboards and Parts - Boating Supplies, Marine Supplies, Nautical Clothing, Boat Parts, & Accessories They were able to provide me with an o-ring for the existing deck plate for the...
  5. Halinbrier

    Lazarette Hinges

    Brian and Joy, I recently purchased new lazarette hinges from Grand Banks in Florida. They were an exact match to the existing hinges on my 92 36' Classic. Contact Garrett Guettler at partsgba@gbmarinegroup.com.
  6. Halinbrier

    2 way headphones

    Eartech Headphones We bought the Eartech 2-way headphones last year from Amazon. WE also bought an extra set of batteries so we are sure to always have a fully charged pair...
  7. Halinbrier

    GB Lazzarette Hatch hinges

    1992 GB 36 Classic Lazarette Hinge One of the hinges on my lazarette hatch broke in half. Is there anyone out there who has a spare? Or does anyone still have a direct link or contact information for GC Malaysia where someone obtained hinges a few years ago? Thanks for your help!
  8. Halinbrier

    When Does it Become Cost Prohibited?

    When will fuel be too expensive? It’s just a matter of priorities!
  9. Halinbrier

    Sold My Selene & Need Another One, or Nordhavn

    Just curious why you say “wrong power”?
  10. Halinbrier

    2 way headphones

    Ditto! We’ve been very happy with our Eartech headsets. A game changer for Captain-Admiral communication during departure, mooring and docking. Agree about the batteries. We bought an extra set of batteries for backup.
  11. Halinbrier

    Custom mattress

    If you are in the greater Seattle area Sleep Eaze in Marysville will build a mattress for you to your exact dimensions and softness/hardness.
  12. Halinbrier

    Comnav Motor Controller

    CT2 Hard-over Timing It doesn't appear that the hard-over timing can be adjusted and is determined by the pumpset. I took a look at the Operation Manual for the ComNav 1001 and couldn't find any information about adjusting for this. I've attached a copy of the Operation Manual for the CT2...
  13. Halinbrier

    Music on board

    We installed a Fusion RA70 with Bluetooth and two zone speaker control - salon and flybridge. The app available for iPhone or Android makes it easy to control music and volume from anywhere on the boat. Really happy with the system. Fusion also makes a NMEA2000 compatible system which can be...
  14. Halinbrier

    Fresh water pump

    Check the pressure relief valve on the hot water heater. I had a similar issue and found mine was leaking a small amount of water but just enough to cause the fresh water pump to cycle periodically.
  15. Halinbrier

    Loose engine mounts

    Thank you everyone for your replys. Very helpful.
  16. Halinbrier

    Loose engine mounts

    I would rather not say for the moment and get unbiased feedback as to whether this is something that is normal or that we should have been watching for or expecting. Thanks.
  17. Halinbrier

    Loose engine mounts

    We had a new propeller shaft, cutlass bearings and engine mounts installed on the starboard side of our GB 36 in November 2016. In April of this year we noticed that the engine had slid down on three of the mounts. It appeared the bottom nuts had become loose and vibrated their down the mounting...
Back
Top Bottom