Pascall
Senior Member
- Joined
- Oct 15, 2022
- Messages
- 284
- Vessel Name
- Passi
- Vessel Make
- Hand made Barkas
Microsoft Office Translator ;
We have 3 anchors on board, the main anchor is with chain, the other two with rope.An angle grinder with 1mm cutting discs, they give the least mess and work the fastest.Also always a welding machine on board!Once stuck with the anchor in Sweden, fortunately the anchor with rope carried out.After a long time of trying, I finally secured the anchor rope on the aft bollard and put all the rope overboard.Sailing away at full throttle and throwing the 14 tons into the battle, and yes the anchor came loose!The boat was quite crooked and the captain gave a scream, and you have to be able to rely 100% on the bollards.
Greeting;
Pascal.
We have 3 anchors on board, the main anchor is with chain, the other two with rope.An angle grinder with 1mm cutting discs, they give the least mess and work the fastest.Also always a welding machine on board!Once stuck with the anchor in Sweden, fortunately the anchor with rope carried out.After a long time of trying, I finally secured the anchor rope on the aft bollard and put all the rope overboard.Sailing away at full throttle and throwing the 14 tons into the battle, and yes the anchor came loose!The boat was quite crooked and the captain gave a scream, and you have to be able to rely 100% on the bollards.
Greeting;
Pascal.